Music power 250W+250W (8ohms)
(both channel drive, a sine wave output, 20Hz - 20kHz) 180W+180W (8ohms)
THD 0.002% or less (20Hz - 10kHz)
0.003% or less (20Hz - 20kHz)
Cross modulation distortion
(60Hz:7kHz=4:1, Output power) 0.003% or less (at the time of 180W equivalent)
Output bandwidth (IHF, both ch(es) drive) 5Hz - 100kHz (THD 0.02%)
Input sensitivity/input impedance 1V/50kohm
Output load impedance 0.04%(1kHz)
Dumping factor 200 (8 ohms, 1kHz)
S/N ratio (IHF-A) 122dB or more
Transmission characteristic 1Hz-350kHz+0dB-3dB
Separation 100dB or more (20Hz - 1kHz)
Slew rate More than �}300v/microsec
Frequency response 10Hz-100kHz�}3dB
Subsonic-Filter characteristic 16Hz, 6 dB/oct
Level meter characteristic Indicating type: Peak value indicating type output level meter
Indicating range: -50dB-+5dB and 0dB=200W/8 ohm
Power supply voltage AC100V, 50Hz/60Hz
Power consumption At the time of a non-signal: 220W
At the time of the Arinobu number: 730W (Electrical Appliance and Material Control Law)Form Stereo power amplifier
Music power 250W+250W (8ohms)
(both channel drive, a sine wave output, 20Hz - 20kHz) 180W+180W (8ohms)
THD 0.002% or less (20Hz - 10kHz)
0.003% or less (20Hz - 20kHz)
Cross modulation distortion
(60Hz:7kHz=4:1, Output power) 0.003% or less (at the time of 180W equivalent)
Output bandwidth (IHF, both ch(es) drive) 5Hz - 100kHz (THD 0.02%)
Input sensitivity/input impedance 1V/50kohm
Output load impedance 0.04%(1kHz)
Dumping factor 200 (8 ohms, 1kHz)
S/N ratio (IHF-A) 122dB or more
Transmission characteristic 1Hz-350kHz+0dB-3dB
Separation 100dB or more (20Hz - 1kHz)
Slew rate More than }300v/microsec
Frequency response 10Hz-100kHz}3dB
Subsonic-Filter characteristic 16Hz, 6 dB/oct
Level meter characteristic Indicating type: Peak value indicating type output level meter
Indicating range: -50dB-+5dB and 0dB=200W/8 ohm
Power supply voltage AC100V, 50Hz/60Hz
Power consumption At the time of a non-signal: 220W
At the time of the Arinobu number: 730W (Electrical Appliance and Material Control Law)